Dell C9000 series, Reference Manual

Page: 2258 / 2286

Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrid (OPTIONAL) Enter a number from 1 to 255 as the VRRP group
ID.
all Enter the keyword
all
to enable debugging of all VRRP groups.
bfd Enter the keyword
bfd
to enable debugging of all VFFP BFD
interactions.
database Enter the keyword
database
to display changes related to
group, prefix, and interface entries in the VRRP table.
packets Enter the keyword
packets
to enable debugging of VRRP
control packets.
state Enter the keyword
state
to enable debugging of VRRP state
changes
timer Enter the keyword
timer
to enable debugging of the VRRP
timer.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.4.1.0 Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default VRF
instances.
Virtual Router Redundancy Protocol (VRRP) 2258