Dell C9000 series, Reference Manual

Page: 1057 / 2286

Version Description
6.3.1.0 Introduced.
Usage Information When you use this command to redistribute routes into a routing domain, the router
becomes an autonomous system (AS) boundary router. An AS boundary router does
not always generate a default route into a routing domain. The router still requires its
own default route before it can generate one.
How a metric value assigned to a default route advertises depends on the
metric-
style
command configuration. If the
metric-style
command is set for Narrow
mode and the metric value in the
default-information originate
command is
set to a number higher than 63, the metric value advertised in the LSPs is 63. If the
metric-style
command is set for Wide mode, the metric value in the
default-
information originate
command is advertised.
Related
Commands
• redistribute — redistributes routes from one routing domain to another routing
domain.
description
Enter a description of the IS-IS routing protocol.
C9000 Series
Syntax
description { description }
To remove the description, use the
no description { description }
command.
Parameters
description Enter a description to identify the IS-IS protocol (80 characters
maximum).
Defaults none
Command Modes ROUTER ISIS
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS) 1057