Parameters
vrf
vrf-name
(OPTIONAL) Enter the keyword
vrf
and then the name of the
VRF to clear information on route dampening corresponding to
that VRF
NOTE:
You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
ipv4 multicast
(OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to clear the ipv4 multicast routes.
ipv4 unicast
(OPTIONAL) Enter the keyword
ipv4
followed by the keyword
unicast
to clear the ipv4 unicast routes.
ipv6 unicast
(OPTIONAL) Enter the keyword
ipv6
followed by the keyword
unicast
to clear the ipv6 unicast routes.
ipv4-address
mask
(OPTIONAL) Enter an IPv4 address in dotted decimal format and
the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
ipv6–address
mask
(OPTIONAL) Enter the IPv6 address and the network mask to
clear information on IPv6 route dampening.
Command Modes
EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.9(0.0)
Introduced on the C9010.
9.8(0.0)
Introduced on the S3048–ON and S4048–ON.
9.7(0.0)
Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0)
Added support for VRF.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage Information After you enter this command, the software deletes the history routes and returns the
suppressed routes to the Active state.
Border Gateway Protocol
444
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...