Dell C9000 series, Reference Manual

Page: 1798 / 2286

Parameters
kbps (Optional) Enter the keyword
kbps
to specify the rate limit in
kilobits per second (Kbps). The range is from 0 to 10000000.
The default granularity is Megabits per second (Mbps).
rate Enter the outgoing rate in multiples of 10 Mbps. The range is
from 0 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to
10000. The default is 50.
Defaults Granularity for rate is Mbps unless you use the
kbps
option.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the
kbps
option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information If traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much
less than the value configured.
Related
Commands rate-shape — shapes traffic output as part of the designated policy.
Policy-Based QoS Commands
Policy-based traffic classification is handled with class maps. These maps classify unicast traffic into one of
four classes. The system allows you to match multiple class maps and specify multiple match criteria. Policy-
based QoS is not supported on logical interfaces, such as port-channels, VLANs, or loopbacks.
Quality of Service (QoS) 1798