Dell C9000 series, Reference Manual

Page: 1430 / 2286

Example
Dell(conf)#protocol spanning-tree mstp
Dell(config-mstp)#no disable
Related
Commands disable — disables multiple spanning tree.
revision
The revision number for the multiple spanning tree configuration.
C9000 Series
Syntax
revision range
To return to the default values, use the
no revision
command.
Parameters
range Enter the revision number for the MST configuration. The range
is from 0 to 65535. The default is
0 .
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information For two MSTP switches to be within the same MST region, the switches must share the
same revision number.
Multiple Spanning Tree Protocol (MSTP) 1430