Dell C9000 series, Reference Manual

Page: 1452 / 2286

router-lifetime
Set the router lifetime.
C9000 Series
Syntax
router—lifetime value
Parameters
value Enter the router lifetime in seconds. The range is from 0 to
9,000 seconds.
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
router-preference maximum
Enable the verification of the advertised default router preference (DRP) value. The preference value is lower
than or equal to the specified limit. If this command is not configured, the verification process is bypassed.
C9000 Series
Syntax
router-preference maximum {high | low | medium}
To reset the default router preference value, use the
no router-preference
maximum {high | low | medium}
command.
Neighbor Discovery Protocol (NDP) 1452