Dell C9000 series, Reference Manual

Page: 463 / 2286

Defaults none
Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Inroduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Related
Commands bgp add-path — allows the advertisement of multiple paths for the same address prefix
without the new paths implicitly replacing any previous ones.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
C9000 Series
Syntax
neighbor { ip-address | peer-group-name } advertisement-interval
seconds
To return to the default value, use the
no neighbor { ip-address | peer-group-
name } advertisement-interval
command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-name Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between BGP
advertisements. The range is from 0 to 600 seconds. The default
is
5 seconds for internal BGP peers and 30 seconds for external
BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Border Gateway Protocol 463