Dell C9000 series, Reference Manual

Page: 802 / 2286

client statistics {all
| interface
type
slot/port }
Enter the keywords
server statistics all
to clear all
counter information on all DHCP client interfaces on the switch.
Enter an interface type and slot/port information to clear DHCP
counters on a specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
.
conflicts Enter the keyword
conflicts
to delete all of the log entries
created for IP address conflicts.
server statistics Enter the keywords
server statistics
to clear all counter
information on the DHCP server.
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820t.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage Information Entering <CR> after the
clear ip dhcp binding
command clears all the IPs from
the binding table.
debug ip dhcp client events
Activate the debugging and display of log messages on DHCP client interfaces for IP address acquisition, IP
address release, and IP address and lease time renewal.
C9000 Series
Syntax
debug ip dhcp client events [interface type slot / port ]
Dynamic Host Configuration Protocol (DHCP) 802