Dell C9000 series, Reference Manual

Page: 2241 / 2286

disable
Disable a VRRP group.
C9000 Series
Syntax
disable
To re-enable a disabled VRRP group, use the
no disable
command.
Command Modes VRRP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information To enable VRRP traffic, assign an IP address to the VRRP group using the
virtual-
address
command and enter
no disable
.
Related
Commands virtual-address — specifies the IP address of the virtual router.
hold-time
Specify a delay (in seconds) before a switch becomes the MASTER virtual router. By delaying the initialization
of the VRRP MASTER, the new switch can stabilize its routing tables.
C9000 Series
Syntax
hold-time { seconds | centisecs centisecs }
Virtual Router Redundancy Protocol (VRRP) 2241