Dell C9000 series, Reference Manual

Page: 885 / 2286

Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related
Commands show frrp — displays the Resilient Ring Protocol configuration.
debug frrp
Clear the FRRP statistics counters.
C9000 Series
Syntax
debug frrp {event | packet | detail} [ ring-id ] [count number ]
To disable debugging, use the
no debug frrp {event | packet | detail}
{ ring-id } [countnumber]
command.
Parameters
event Enter the keyword
event
to display debug information related
to ring protocol transitions.
packet Enter the keyword
packet
to display brief debug information
related to control packets.
detail Enter the keyword
detail
to display detailed debug information
related to the entire ring protocol packets.
ring-id (Optional) Enter the ring identification number. The range is
from 1 to 255.
count number Enter the keyword
count
then the number of debug outputs.
The range is from 1 to 65534.
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Force10 OS Resilient Ring Protocol (FRRP) 885