Dell C9000 series, Reference Manual

Page: 892 / 2286

Version Description
7.4.1.0 Introduced
Usage Information This command places you into the resilient ring protocol. After executing this
command, the command line prompt changes to
conf-frrp
.
show frrp
Display the resilient ring protocol configuration.
C9000 Series
Syntax
show frrp [ ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identification number. The range is from 1 to 255
summary (OPTIONAL) Enter the keyword
summary
to view just a
summarized version of the Ring configuration.
Defaults none
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information Executing this command without the optional
ring-id
command clears the statistics
counters on all the available rings. The system requires a command line confirmation
before the command executes. This command clears the following counters:
• hello Rx and Tx counters
Force10 OS Resilient Ring Protocol (FRRP) 892