Dell C9000 series, Reference Manual

Page: 603 / 2286

To disable, use the
no neighbor { ipv6-address | peer-group-name } fall-
over
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name Enter the name of the peer group.
Defaults Disabled.
Command Modes ROUTER BGP
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information When you enable fall-over, BGP keeps track of IP or IPv6 reachability to the peer
remote address and the peer local address. Whenever either address becomes
unreachable (for example, no active route exists in the routing table for peer IP or IPv6
destination/local address), BGP brings down the session with the peer.
Related
Commands show ip bgp neighbors – displays information on the BGP neighbors.
neighbor filter-list
Configure a BGP filter based on the AS-PATH attribute.
C9000 Series
Syntax
neighbor { ipv6-address | peer-group-name } filter-list as-path-name
{in | out}
To delete a BGP filter, use the
no neighbor { ipv6-address | peer-group-
name } filter-list as-path-name {in | out}
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Border Gateway Protocol 603