Dell C9000 series, Reference Manual

Page: 1986 / 2286

To disable hostbased-authentication for SSHv2 server, use the
no ip ssh
hostbased-authentication enable
command.
Parameters
enable Enter the keyword
enable
to enable hostbased-authentication
for SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information If you enable this command, clients can log in without a password prompt. This
command provides two levels of authentication:
• rhost-authentication is done with the file specified in the
ip ssh rhostfile
command.
• checking client host-keys is done with the file specified in the
ip ssh pub-key-
file
command.
NOTE: Administrators must specify the two files (
rhosts
and
pub-key-file
) to
configure host-based authentication.
Related
Commands
ip ssh pub-key-file — public keys of trusted hosts from a file.
ip ssh rhostsfile — trusted hosts and users for rhost authentication.
Security 1986