Dell C9000 series, Reference Manual

Page: 2231 / 2286

Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Removed the default value on the S-Series and Z-Series.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Usage Information In a square VLT topology with a single link connecting to the remote peers, If a VLT
peer goes down, the local VLT node must be prompted to stop transmitting it’s peer’s
MAC address. You can configure the
peer-timeout value
command to stop the
local VLT node from transmitting the peer MAC address within the configured peer
timeout value. The default timeout value is infinity. You must enable the
vlt-peer-
mac transmit
to configure a peer time out value.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
proxy-gateway static
Enable the proxy-gateway feature using static configurations.
C9000 Series
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information When proxy-gateway static configuration is added, the setting is saved in the Layer 2
module. When you remove the static proxy gateway configuration, each
proxy-
gateway static
mac configured is deleted from the Layer 2 module.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Virtual Link Trunking (VLT) 2231