Dell C9000 series, Reference Manual

Page: 764 / 2286

Hardware Commands
The hardware commands supported on the switch allow you to display information from a hardware sub-
component or ASIC.
clear control-traffic
Clear control-traffic statistics from the CPU.
C9000 Series
Syntax
clear control—traffic {all | cp—switch | linecard slot-id portset
port-pipe } counters
Parameters
cp-switch Enter the keyword
cp-switch
to clear the counters for control
traffic on the control plane.
linecard slot-id
portset port-pipe
Enter the slot ID and port pipe to clear the counters for control
traffic on a specified switch line card and port set. The range of
slot IDs is from 0 to 2. The range of port-pipe numbers is: 0 to 2
on line card 0 and 0 to 3 on line cards 1 and 2.
all Enter the keyword
all
to clear control-traffic statistics on the
control plane and all line cards.
Defaults None.
Command Modes EXEC Privilege
Example
Dell# clear control-traffic cp-switch counters
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the ES-Series.
Debugging and Diagnostics 764