Dell C9000 series, Reference Manual

Page: 1685 / 2286

INTERFACE (BATCH Mode)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series for the port-channels and the S-
Series.
Usage Information The interface must be enabled (the
no shutdown
command) and not have the
switchport
command configured. Multicast must also be enabled globally (using the
ip multicast-lag-hashing
command). PIM is supported on the port-channel
interface.
ip pim spt-threshold
To switch to the shortest path tree when the traffic reaches the specified threshold value, configure the PIM
router.
C9000 Series
Syntax
ip pim spt-threshold [infinity]
To return to the default value, use the
no ip pim spt-threshold [infinity]
[vrf vrf-name ]
command.
Parameters
infinity (OPTIONAL) Enter the keyword
infinity
to never switch to the
source-tree.
Defaults Not configured.
Command Modes CONFIGURATION
PIM-Sparse Mode (PIM-SM) 1685