Field
Description
“Port path...”
Displays the path cost, priority, and identifier for the interface.
“Designated
root...”
Displays the priority and MAC address of the root bridge of the
STG that the interface belongs.
“Designated
port...”
Displays the designated port ID.
The following describes the
show spanning-tree 0 guard
command shown in the
Example (Guard).
Field
Description
Interface Name
STP interface.
Instance
STP 0 instance.
Sts
Port state: root-inconsistent (INCON Root), forwarding (FWD),
listening (LIS), blocking (BLK), or shut down (EDS Shut).
Guard Type
Type of STP guard configured (Root, Loop, or BPDU guard).
The
peGigE
ports and VP-LAG ports information is displayed as part of the
show
spanning-tree 0
command output, only when the
guard
option is entered.
Example
Dell#show spanning-tree 0
Executing IEEE compatible Spanning Tree Protocol
Bridge Identifier has priority 32768, Address 0001.e800.0a56
Configured hello time 2, max age 20, forward delay 15
We are the root of the spanning tree
Current root has priority 32768 address 0001.e800.0a56
Topology change flag set, detected flag set
Number of topology changes 1 last change occurred 0:00:05 ago
from TenGigabitEthernet 1/3
Timers:hold 1, topology change 35
hello 2, max age 20, forward_delay 15
Times:hello 1, topology change 1, notification 0, aging 2
Port 26 (TenGigabitEthernet 1/1) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.26
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.26, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Port 27 (TenGigabitEthernet 1/2) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.27
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.27, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:18, received 0
The port is not in the portfast mode
Spanning Tree Protocol (STP)
2119
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...