Usage Information The following describes the
debug ip packet
command in the following example.
Field
Description
s=
Lists the source address of the packet and the name of the
interface (in parentheses) that received the packet.
d=
Lists the destination address of the packet and the name of the
interface (in parentheses) through which the packet is being sent
out on the network.
len
Displays the packet’s length.
sending, rcvd,
fragment, sending
broad/multicast
proto, unroutable
The last part of each line lists the status of the packet.
TCP src=
Displays the source and destination ports, the sequence
number, the acknowledgement number, and the window size of
the packets in that TCP packets.
UDP src=
Displays the source and destination ports for the UDP packets.
ICMP type=
Displays the ICMP type and code.
IP Fragment
States that it is a fragment and displays the unique number
identifying the fragment (Ident) and the offset (in 8-byte units) of
this fragment (fragment offset) from the beginning of the
original datagram.
Example
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 54, sending
TCP src=23, dst=40869, seq=2112994894, ack=606901739,
win=8191 ACK PUSH
IP: s=10.1.2.206 (Ma 0/0), d=10.1.2.62, len 40, rcvd
TCP src=0, dst=0, seq=0, ack=0, win=0
IP: s=10.1.2.62 (local), d=10.1.2.206 (Ma 0/0), len 226, sending
TCP src=23, dst=40869, seq=2112994896, ack=606901739,
win=8192 ACK PUSH
IP: s=10.1.2.216 (Ma 0/0), d=10.1.2.255, len 78, rcvd
UDP src=0, dst=0
IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500, sending
fragment
IP Fragment, Ident = 4741, fragment offset = 0
ICMP type=0, code=0
IP: s=10.1.2.62 (local), d=10.1.2.3 (Ma 0/0), len 1500, sending
fragment
IP Fragment, Ident = 4741, fragment offset = 1480
IP: s=40.40.40.40 (local), d=224.0.0.5 (Te 2/11), len 64, sending
broad/multicast
proto=89
IP: s=40.40.40.40 (local), d=224.0.0.6 (Te 2/11), len 28, sending
broad/multicast
proto=2
IP: s=0.0.0.0, d=30.30.30.30, len 100, unroutable
ICMP type=8, code=0
IP: s=0.0.0.0, d=30.30.30.30, len 100, unroutable
ICMP type=8, code=0
IPv4 Routing
1184
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...