Dell C9000 series, Reference Manual

Page: 2244 / 2286

Parameters
priority Enter a number as the priority. Enter 255 only if the router’s
virtual address is the same as the interface’s primary IP address
(that is, the router is the OWNER). The range is from 1 to 255.
The default is
100 .
Defaults 100
Command Modes VRRP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.16.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information To guarantee that a VRRP group becomes MASTER, configure the VRRP group’s virtual
address with same IP address as the interface’s primary IP address and change the
priority of the VRRP group to 255.
If you set the
priority
command to 255 and the
virtual-address
is not equal to
the interface’s primary IP address, an error message appears.
show config
View the non-default VRRP configuration.
C9000 Series
Syntax
show config [verbose]
Parameters
verbose (OPTIONAL) Enter the keyword
verbose
to view all VRRP group
configuration information, including defaults.
Virtual Router Redundancy Protocol (VRRP) 2244