Dell C9000 series, Reference Manual

Page: 659 / 2286

show hardware forwarding-table mode
Display the hardware forwarding table mode in the current boot and in the next boot.
Syntax
show hardware forwarding-table mode
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000, S6000-ON, and Z9500 switch.
Example
Dell#show hardware forwarding-table mode
Current Settings Next Boot
Settings
Mode : Default scaled-l3-hosts
L2 MAC Entries : 160K 96K
L3 Host Entries : 144K 208K
L3 Route Entries : 16K 16K
Dell#
Related
Commands
hardware forwarding-table mode — selects the mode to initialize the maximum
scalability size for L2 MAC table or L3 Host table or L3 Route table.
hardware forwarding-table mode
Select a mode to initialize the maximum scalability size for L2 MAC table or L3 Host table or L3 Route table.
Syntax
hardware forwarding-table mode {scaled-l3- hosts | scaled-l3-
routes}
Parameters
scaled-l3–
hosts
Enter the keyword
scaled-l3–hosts
to select the forwarding
table mode for scaling l3 host entries..
scaled-l3–
routes
Enter the keyword
scaled-l3–routes
to select the forwarding
table mode for scaling l3 route entries.
Defaults UFT mode 2
Command Modes CONFIGURATION
Content Addressable Memory (CAM) 659