Dell C9000 series, Reference Manual

Page: 1626 / 2286

Version Description
9.2(1.0) Introduced on the Z9500.
9.0(0.0) Added support for IPv6 for the
file-url
parameter.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for TFTP and SCP.
7.6.1.0 Introduced on the S-Series.
Usage Information You can specify the source location and can choose
usbflash:
or
flash:
as a source location.
You can choose rmpA (for partition A) or rpm B (for partition B) as your destination. The system
boots up from the newly upgraded partition after you reload the system with the
reload
command. To verify that the Dell Networking OS image was correctly upgraded, use thee
show
boot system all
command.
For more information on the upgrade process, see the Dell Networking C9010 and C1048P
Release Notes .
Example
Dell# upgrade system stack-unit 0 usbflash://FTOS-C1048.bin rpmA:
00:39:32 : Discarded 1 pkts. Expected block num : 51. Received block num:
50
!00:39:36 : Discarded 1 pkts. Expected block num : 65. Received block
num: 64
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!..!
...........!!!!!!!!!!!!!!!!!!!!!!!
93924044 bytes successfully copied
System image upgrade completed successfully.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Image upgraded to all
PE Console Commands 1626