Dell C9000 series, Reference Manual

Page: 1070 / 2286

Override the default restart-wait time by entering the
no graceful-restart
restart-wait
command. When you disable
restart-wait
, the current adjacency
hold time is used.
Set the t3 timer to
adjacency
on the restarting router when implementing this
command. The restarting router gets the remaining time value from its peer and adjusts
its T3 value so only when you have configured
graceful-restart t3 adjacency
.
Related
Commands graceful-restart restart-wait — enables the graceful restart maximum wait time before a
restarting peer comes up.
hello padding
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON or
OFF for LAN or point-to-point hello PDUs.
C9000 Series
Syntax
hello padding [multi-point | point-to-point]
To return to the default, use the
no hello padding [multi-point | point-to-
point]
command.
Parameters
multi-point (OPTIONAL) Enter the keywords
multi-point
to pad only LAN
hello PDUs.
point-to-point (OPTIONAL) Enter the keywords
point-to-point
to pad only
point-to-point PDUs.
Defaults Both LAN and point-to-point hello PDUs are padded.
Command Modes ROUTER ISIS
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS) 1070