Dell C9000 series, Reference Manual

Page: 1759 / 2286

Parameters
pe pe-id Enter the keyword
pe
and the port extender ID. Range is from 0
to 255.
stack-unit unit
number
Enter the keyword
stack-unit
and the stack unit number
Range is from 0 to 7.
interface interface
Enter the
interface
keyword, and specify one of the following
interface types:
• For a PE Gigabit Ethernet interface, enter the keyword
peGigE
. You must specify a pe-id/Unit/Port for the
interface.
.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information The following describes the output fields of the
show power inline
command:
Field Description
Interface Displays the line card or the port extender interface slot and port
number.
Inline Power
Allocated Displays the amount of power allocated to the port.
Inline Power
Consumed Displays the amount of power consumed by the connected
device.
Class
Displays the power classification of the connected device. If the
device is powered up properly, it displays Class 0, 1, 2, 3, or 4.
Displays the following under different conditions:
• NO_DEVICE if no device is present.
• LEGACY if a legacy device is connected.
• PD_S/C if a short-circuit condition is detected.
• PD_OVRLD if overload condition is detected.
Port Extenders (PE) 1759