For a correct, safe use of the equipment, please read the following carefully and
rictly observe the operation
safety rules during your operations.
st
A N 5 5 0 6 - 0 4 F
-
C o d e : M N 0 0 0 0 0 0 6 1 9 V e r s i o n : C
User Manual
Packing List:
AN5506-04: 1 DC or storage battery power adapter : 1 RJ 45 crystal head: 5
RJ 11 crystal head 3 User Manual 1 Certificate: 1. Please contact your supplier if
anything is missing.
●
●
●
-
●
-
:
●
:
●
Thank you for choosing FiberHome products.
Operation Safety Rules
Avoid moisture, dampness and water damage. Equipment exposed to water cannot work
normally and can be extremely hazardous due to shorting.
Do not lay this equipment on an unsteady base.
Interfaces and Connections
Equipment Installation
The AN5506-04-F can be horizontally or vertically placed on a desk, or hung against the wall.
GPON
Optical Network Unit
Technical Specification
Description
Type
Item
Mechanical
parameters
Power supply
parameter
Power consumption
parameter
Dimension
Weight
DC
AN5506-04-F
Operating temperature
Storage temperature
Environmental humidity
45
/ .
-30℃
60℃
10%
90%
mm×235mm×174mm H W D)
390g approximately
DC 12V 1 5A
12W
-5℃ to
to
to
, non-condensing
(
45℃
Indicator LED Description
Power status LED
(green)
ON: The equipment is
powered on
OFF: The equipment is not
powered on
VOIP status LED
(green)
ON: The equipment registers to the
softswitch system successfully
OFF: The equipment does not
register to the softswitch system
Phone port LED
(green)
ON: The equipment registers to the
softswitch platform successfully
Blinking: The port is transmitting service flow
ON: The equipment fails to register to the
softswitch platform
Registration status LED
(green)
ON: The ONU is activated
OFF: The ONU is not activated
Wireless signal status LED (green)
ON: The wireless interface is enabled
Blinking: Service flow transmission exists
OFF: The wireless interface is disabled
Optical signal status LED
(red)
Blinking: The equipment receives no
optical signal.
OFF: The equipment receives optical
signals.
Ethernet interface status LED
(Green)
ON: The interface is connected to the user terminal
without data transmission
Blinking: The interface is transmitting
and receiving data
OFF: The interface is not connected
to the user terminal
Horizontally placed
Verticall placed
12 13 14
15
12 Button for setting WI FI
safety protection
13 Reset key
14 Wireless switch
15 USB interface
.
-
.
.
.
High optical power can cause bodily harm, especially to eyes. Never look directly into the
end of the optical transmitter fiber jumper or the end of its active connector.
Exercise care if you must bend fibers. If bends are necessary, the fiber bending radius should
never be less than 38mm.
Power socket overload, broken cables or broken plugs may cause electric shock or fire.
Regular check-ups on power supply wires and cables are essential. If any appears damaged,
replace at once.
Use the power supply adapter provided in the package only. Using other adapters may cause
equipment damage or operation failures.
Install the equipment in a well ventilated environment without high temperatures or direct
sunlight to protect the equipment and its components from overheating, which can result in
damage.
Uses GPON uplink that is compliant with ITU-T G.984 series of standards;
Supports Ethernet interface rate, working mode, MDI / MDIX auto-negotiation mode;
Supports packet filtering and DoS attack protection;
Provides performance statistics on all Ethernet lines;
Supports reporting the physical position information of Ethernet interfaces through DHCP Option82;
Supports the PPPoE+ function for obtaining user IP address and accurate user identification;
Supports various voice protocols including H.248 and SIP;
Supports IGMP snooping protocol;
Supports the L2 / L3 wire speed forwarding;
Supports the AES-128 algorithm for data encryption of downlink data;
Supports global configuration of queue priority and flexible mapping of 802.1p value of packets. Supports
the PQ queue scheduling mode. You can configure the weight of scheduling queue to ensure the QoS of the
services with high QoS requirement such as voice and video under multiple service conditions;
Supports wireless access mode, compliant with the 802.11 b/g/n standard;
Supports the following authentication modes: open, shared, wpapsk, wpa2psk, wpapskwpa2psk. Supports
the following encryption modes: none, wep, tkip, aes, and tkipaes.
The AN5506-04-F is an FTTH GPON optical network unit. It provides communication and entertainment service in multiple modes such as
data, voice, and video, to meet integrated access requirement of families or small enterprises. The AN5506-04-F supports these functions:
Product Introduction
Wall Mounting
1
2
USB LED
USB
USB
USB
(green)
ON: The
is connected without data transmission
Blinking: The
is transmitting and receiving data
OFF: The
is not connected
6. LAN switch
LED switch
USB
7.
8.
9.
10.
11.
Button for setting WI FI
safety protection
Reset key
Wireless switch
interface
-
7
8
9
11
6
10
AN5506 04 F2G Side Panel
-
-
AN5506-04-F2G
AN5506-04-F3
4 GE ports and 2 phone
ports
1 GE port, 3 FE ports
and 2 phone ports
External antenna
Built-in antenna
Environmental
parameter
2. Drill two holes and install
expansion bolts
3. Install screws and hang the
equipment on them
1
2
3
4
5
1. Network interface
Voice interface
Optical interface
Power switch
Power interface
2.
3.
4.
5.
AN5506 04 F3 Side Panel
-
-
Optical
interface
PC
Best antenna position
Laptop
Smart
phone
Power
adapter
Phone
●●●●●●●●●●●
●
●
1. Mark the installation
position