Product Overview
Hard Drive Installation
Quick Installation Guide
Network Video Recorder
Package Contents
Network Video Recorder
Network Video Recorder
Quick Installation Guide
Mouse
Power Adapter
HDD Screws
Network Video Recorder
LAN
HDD
POWER
USB
Network Status
Indicator
Hard Disk Drive
Indicator
Power Status
Indicator
On
On
Off
Network is working properly.
The network is malfunctioning.
Data is being transmitted or received.
The HDD is normal.
The NVR is powered on.
No HDD or the HDD is malfunctioning.
On
Flashing
Off
LAN
HDD
POWER
Indicator
Name
Status
Description
Off
The NVR is powered off.
1
3
2
2. Attach the 4 included HDD screws to your hard drive. Do not fasten.
1. Remove the fixing screws on the side and back panels to open the
cover of the NVR.
Front Panel
Back Panel
For the first time installation, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of surveillance or enterprise
level. Before installation, please disconnect the power from the network video recorder (NVR).
POWER
AUDIO OUT
VGA
HDMI
LAN
AUDIO IN
3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert
the HDD interface into the slot.
4. Flip the NVR upside down and fasten the HDD screws. Replace the
cover and fasten the screws of the NVR.
Hard Disk Drive (HDD)
POWER
VGA
LAN
AUDIO IN
AUDIO OUT
USB
(Front Panel)
Interface
Description
2 USB ports for additional devices* such as USB mouse, USB storage device,
and USB keyboard.
Output port for analog video signals.
Connect your monitor to this port if it uses VGA connection.
RJ45 10/100Mbps self-adaptive Ethernet port.
Connect to an Ethernet device (eg. router and switch).
AUDIO IN /
AUDIO OUT
VGA
HDMI
POWER
Connector for power input.
LAN
Output port for high-definition audio and video signals. Connect
your monitor to this port if it uses HDMI connection.
Connector for audio input and output.
Note:
Audio input only supports microphones with power supply.
POWER
USB
HDD LAN
*Images may differ from actual products.
©2021 TP
-Link 7106509295 RE
V1.2.1