Raritan PX3-3000 series, Руководство пользователя

Страница: 357 / 875

Chapter 6: Using the Web Interface
333
2. Click the Action field to select an action type from the list.
3. Below is the list of available actions.
Note: The "Change load shedding state" and "Switch outlets" options
are only available for outlet-switching capable models.
Action Function
Alarm Requires the user to acknowledge the alert
after it is generated. If needed, you can have
the alert notifications regularly generated until
a person takes the acknowledgment action.
See
Alarm
(on page 335).
Change load
shedding state Enters or quits the load shedding mode. See
Change Load Shedding State
(on page 336).
Execute an action
group Creates a group of actions comprising existing
actions. See
Action Group (on page 336).
External beeper Enables or disables the connected external
beeper, or causes it to enter an alarm cycle.
See
External Beeper (on page 337).
Internal beeper Turns on or off the internal beeper. See
Internal Beeper
(on page 337).
Log event message Records the selected events in the internal log.
See
Log an Event Message
(on page 337).
Push out sensor
readings Sends internal sensor log, environmental
sensor log or asset management strip data to a
remote server using HTTP POST requests. See
Push Out Sensor Readings
(on page 338).
Record snapshots to
webcam storage Makes a connected webcam start or stop
taking snapshots. See
Record Snapshots to
Webcam Storage
(on page 338).
Request LHX/SHX
maximum cooling Applies the maximum cooling to the LHX/SHX
device. See
Request LHX/SHX Maximum
Cooling
(on page 339).
This option is available only when the Schroff
LHX/SHX support has been enabled.