Raritan PX3-3000 series, Руководство пользователя

Страница: 751 / 875

Appendix G: Old PX3 Character LCD Display
727
To retrieve the "IPv4" address on PX3:
1. Press the MODE button to enter the Device mode, indicated by an
alphabet "d" at the top left of the display.
2. The LCD display cycles between the four octets of the IPv4 address,
indicated by "i4" at the upper right corner of the display.
For example, 192.168.84.4 cycles in this sequence:
192 --> 168 --> 84 --> 4
MAC Address
This product's MAC address is retrievable by operating the LCD display.
Below illustrates the MAC address information.
Section Example information
"d" means the LCD display has entered the Device mode.
"M" indicates that the displayed information is the MAC
address.
The word "MASTER" indicates the PX3 is the master
device in a cascading chain.
For a slave device, it shows "SLAVE" instead.
Note: As of release 3.3.10, the "MASTER/SLAVE"
information is no longer available in the Bridging mode,
but remains available in the Port Forwarding mode.
The LCD display is showing "03," which is part of the MAC
address.
To display the MAC address:
1. Press the MODE button to enter the Device mode, indicated by a 'd'
in at the top left of the display.
2. Press the FUNC button until the MAC address is displayed. The
character "M" appears in the left side of the LCD display.