Raritan PX3-3000 series, Руководство пользователя

Страница: 618 / 875

Chapter 8: Using the Command Line Interface
594

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified inlet sensor. See
"To De-assert" and Deassertion
Hysteresis
(on page 798).

<as_value> is a numeric value that is assigned to the assertion
timeout for the specified inlet sensor. See
"To Assert" and
Assertion Timeout (on page 796).
Commands for Inlet Pole Sensors
A sensor configuration command for inlet poles begins with
sensor
inletpole. This type of command is available on a three-phase PDU only.
You can configure various inlet pole sensor threshold settings at a time
by combining multiple commands. See
Multi-Command Syntax (on page
617).
Set the Upper Critical Threshold for an Inlet Pole:
config:# sensor inletpole <n> <p> <sensor type> upperCritical <option>
Set the Upper Warning Threshold for an Inlet Pole:
config:# sensor inletpole <n> <p> <sensor type> upperWarning <option>
Set the Lower Critical Threshold for an Inlet Pole:
config:# sensor inletpole <n> <p> <sensor type> lowerCritical <option>
Set the Lower Warning Threshold for an Inlet Pole:
config:# sensor inletpole <n> <p> <sensor type> lowerWarning <option>
Set the Inlet Pole's Deassertion Hysteresis:
config:# sensor inletpole <n> <p> <sensor type> hysteresis <hy_value>
Set the Inlet Pole's Assertion Timeout: