Raritan PX3-3000 series, Руководство пользователя

Страница: 512 / 875

Chapter 8: Using the Command Line Interface
488
Note: This feature does NOT take effect and cannot be configured on a
PX3 device after the outlet relay is set to the "Latching" mode. See
PX3
Latching Relay Behavior
(on page 162).
Setting the PDU-Defined Cycling Power-Off Period
This section applies to outlet-switching capable models only.
This command sets the power-off period of the power cycling operation
for all outlets.
config:# pdu cyclingPowerOffPeriod <timing>
Variables:

<timing> is the time of the cycling power-off period in seconds,
which is an integer between 0 and 3600, or
pduDefined for following
the PDU-defined timing.
Setting the Inrush Guard Delay Time
This section applies to outlet-switching capable models only.
This command sets the inrush guard delay.
config:# pdu inrushGuardDelay <timing>
Variables:

<timing> is a delay time between 100 and 100000 milliseconds.