Raritan PX3-3000 series, Руководство пользователя

Страница: 741 / 875

Appendix F: PX3 Models with Residual Current Monitoring
717
config:# residualCurrentMonitor <n> criticalRatedResidualOperatingCurrent <value>
Note: The PX3 triggers events when residual current values are above
(but not equal to) thresholds. For example, you would set the critical
threshold to 29mA to specify the IEC 62020 IΔn of 30mA. See
Compliance with IEC 62020 (on page 706).
To configure the RCM's Warning level:
config:# residualCurrentMonitor <n> warningRatedResidualOperatingCurrent <value>
To configure the RCM's deassertion hysteresis:
config:# residualCurrentMonitor <n> deassertionHysteresis <hy_value>
Variables:

<n> is the number of the inlet where the desired RCM current sensor
is mounted. For a single-inlet PDU, this number is always 1.

<value> is one of the options: enable, disable or a numeric value
measured in amperes.
Option Description
enable Enables the specified RCM current threshold for
the specified inlet.
disable Disables the specified RCM current threshold for
the specified inlet.
A numeric
value Sets a value for the specified RCM current
threshold of the specified inlet and enables this
threshold simultaneously.
Note that this value is measured in A, not mA.
Therefore, to set the value to 6mA, type
0.006.

<hy_value> is a numeric value measured in amperes (A), not
milliamperes (mA). For example, to set the value to 15mA, type
0.015.