Raritan PX3-3000 series, Руководство пользователя

Страница: 73 / 875

Chapter 3: Initial Installation and Configuration
49
2. Connect one end to an iX7
™
device's EXPANSION port, and the other
end to another one's EXPANSION port.

Note that the EXPANSION port location on your iX7
™
may differ
from the following images.
Power-Sharing Configurations and Restrictions
When either iX7
™
PDU enters the power-sharing mode, BOTH PDUs
involved in the power-sharing connection support "less" external
equipment than usual. It is strongly recommended to remove specific
equipment from both iX7
™
PDUs when making a power-sharing
connection.
Configuration limitations on "both" PDUs:

No USB wireless LAN adapter is connected. That is, you have to
connect both PDUs to a "wired" network if LAN access is wanted.

No asset management strips are connected.

The maximum number of DX environmental packages or door
handles that can be connected decreases. For details, see
Supported Sensor Configurations for Power Sharing (on page 50).

When either PDU enters the power-sharing mode, you must NOT
physically remove or add environmental sensor packages to BOTH
PDUs.