Raritan PX3-3000 series, Руководство пользователя

Страница: 620 / 875

Chapter 8: Using the Command Line Interface
596

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified inlet pole sensor. See
"To De-assert" and
Deassertion Hysteresis
(on page 798).

<as_value> is a number in samples that is assigned to the assertion
timeout for the specified inlet pole sensor. See
"To Assert" and
Assertion Timeout (on page 796).
Commands for Overcurrent Protector Sensors
A sensor configuration command for overcurrent protectors begins with
sensor ocp.
You can configure various overcurrent protector threshold settings at a
time by combining multiple commands. See
Multi-Command Syntax (on
page 617).
Set the Upper Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an overcurrent protector:
config:# sensor ocp <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an overcurrent protector: