Raritan PX3-3000 series, Руководство пользователя

Страница: 113 / 875

Chapter 5: Introduction to PDU Components
89
Port Used for...
USB-B

Cascading the PX3 devices for sharing a network connection. See
Cascading PX3 via USB (on page 38).

Establishing a USB connection between a computer and the PX3 for
using the command line interface or performing the disaster recovery.
For disaster recovery instructions, contact Raritan Technical Support.
USB-A
This is a "host" port, which is powered, per USB 2.0 specifications.

Connecting a USB device, such as a Logitech
®
webcam or wireless LAN
adapter.

Cascading the PX3 devices for sharing a network connection.
FEATURE Connection to one of the following devices:

A Raritan access product, such as Dominion KX III KVM switch, with
the use of a power CIM.

A Schroff
®
LHX-20, SHX-30 or LHX-40 device, using an RJ-45 to
RS-232 cable provided by Schroff.

An external beeper with the RJ-45 socket.

A Raritan asset management strip, which allows you to track the
locations of IT devices on the rack.
See
Connecting External Equipment (Optional)
(on page 52).
Warning: This is not an RS-232 port so do NOT plug in an RS-232 device,
or damages can be caused to the device.
CONSOLE/
MODEM
(DB9)
Establishing a serial connection between the PX3 and a computer or
modem.
This is a standard DTE RS-232 port. You can use a null-modem cable with
two DB9 connectors on both ends to connect the PX3 to the computer.
SENSOR
(RJ-45)
Connection to one of the following devices:

Raritan's environmental sensor package(s).

Raritan's sensor hub, which expands the number of a sensor port to
four ports.