Raritan PX3-3000 series, Руководство пользователя

Страница: 79 / 875

Chapter 4: Connecting External Equipment (Optional)
55
Using an Optional DPX-ENVHUB4 Sensor Hub
Optionally, you can connect a Raritan
DPX-ENVHUB4 sensor hub to the
PX3. This allows you to connect up to four DPX sensor packages to the
PX3 via the hub.
This sensor hub supports DPX sensor packages only. Do NOT connect
DPX2, DPX3 or DX sensor packages to it.
DPX-ENVHUB4 sensor hubs CANNOT be cascaded. You can connect only
one hub to each SENSOR port on the PX3.
Tip: The Raritan sensor hub that supports ALL types of Raritan
environmental sensor packages is DPX3-ENVHUB4. See
Using an
Optional DPX3-ENVHUB4 Sensor Hub (on page 65).
To connect DPX sensor packages via the DPX-ENVHUB4 hub:
1. Connect the DPX-ENVHUB4 sensor hub to the PX3.
a. Plug one end of the Raritan-provided phone cable (4-wire, 6-pin,
RJ-12) into the IN port (Port 1) of the hub.
b. Get an RJ-12 to RJ-45 adapter. Connect this adapter's RJ-12
connector to the other end of the phone cable.
c. Connect this adapter's RJ-45 connector to the PDU's RJ-45
SENSOR port.
2. Connect DPX sensor packages to any of the four OUT ports on the
hub.
This diagram illustrates a configuration with a sensor hub connected.
The PX3 device
RJ-12 to RJ-45 adapter
Raritan-provided phone cable