Raritan PX3-3000 series, Руководство пользователя

Страница: 526 / 875

Chapter 8: Using the Command Line Interface
502
config:# network ipv6 staticRoutes add <dest-1> interface <ETH>
Delete an existing static route:
config:# network ipv6 staticRoutes delete <route_ID>
Modify an existing static route:
config:# network ipv6 staticRoutes modify <route_ID> <dest-2> <hop>
-- OR --
config:# network ipv6 staticRoutes modify <route_ID> <dest-2> interface <ETH>
Variables:

<dest-1> is the IP address and prefix length of the subnet where the
PX3 belongs. The format is
IP address/prefix length.

<hop> is the IP address of the next hop router.

<ETH> is one of the interfaces:
ethernet (or ETH1/ETH2), wireless
and bridge. Type "bridge" only when your PX3 is in the bridging
mode.

<route_ID> is the ID number of the route setting which you want to
delete or modify.

<dest-2> is a modified route setting that will replace the original
route setting. Its format is
IP address/prefix length. You can modify
either the IP address or the prefix length or both.