Raritan PX3-3000 series, Руководство пользователя

Страница: 604 / 875

Chapter 8: Using the Command Line Interface
580
config:# authentication ldap modify 1 host 192.168.3.3 port 633
serverType activeDirectory
Removing an Existing LDAP Server
This command removes an existing LDAP server from the server list.
config:# authentication ldap delete <server_num>
Variables:

<server_num> is the sequential number of the specified server in the
LDAP server list.
Radius Settings
All Radius-related commands begin with
authentication radius.
If you enable Radius authentication, you must add at least one Radius
server. Later you can modify or delete any existing Radius server as
needed.
Adding a Radius Server
You can repeat the following commands to add Radius servers one by
one.
Command syntax:
config:# authentication radius add <host> <rds_type> <auth_port> <acct_port> <timeout>
<retries>
Variables:

<host> is the IP address or host name of the Radius server.

<rds_type> is one of the Radius authentication types: pap, chap,
msChapV2.
Type Description
chap
CHAP
pap
PAP
msChapV2
MSCHAP v2