![background image](http://html1.mh-extra.com/html/omron/cs1w-mch71/cs1w-mch71_operation-manual_742367566.webp)
521
Interface Specifics
Section 7-4
The bit [Busy] will be turned ON when the execution of the following functions
is started after they were accepted, and turned OFF when the execution is
completed and the command is turned OFF.
Effect on Other Functions
The following functions will be restricted while the bit [Busy] is ON:
System Parameter
Nil
Timing Chart
See “JOG Operation” (page 476), “STEP Operation” (page 480), “Origin
Search” (page 484), “Machine Origin Return” (page 489), “Error Counter
Reset” (page 493), “Forced Origin” (page 498), and “ABS Origin Setting”
(page 500).
Function
The bit [No Origin] indicates the status of whether the origin on the machine
coordinate system is defined or not.
Status Condition
• When the MC Unit is powered ON, the bit [No Origin] will be turned ON. It
will be turned OFF through the operations of the following functions. Exe-
cuting present position preset using IOWR will not turn OFF the bit.
Function
Axis Control Bit: JOG
Axis Control Bit: STEP
Axis Control Bit: Origin Search
Axis Control Bit: Machine Origin Return
Axis Control Bit: Error Counter Reset
Axis Control Bit: Forced Origin
Axis Control Bit: ABS Origin Setting
Function
Restriction
Axis Control Bit: JOG
Cannot be executed
Axis Control Bit: STEP
Cannot be executed
Axis Control Bit: Origin Search
Cannot be executed
Axis Control Bit: Machine Origin Return
Cannot be executed
Axis Control Bit: Forced Origin
Cannot be executed
Axis Control Bit: ABS Origin Setting
Cannot be executed
Axis Control Bit: JOG/STEP Direction
Cannot be executed
IOWR: Present Position Preset
Cannot be executed
Word
Variable
Bit
Name
I/O
x+32
-
x+63
OW0440
-
OW045F
04
No Origin (Axis 1)
-
No Origin (Axis 32)
Input
Name
Specifications
No Origin
0: Origin on machine coordinate system is defined.
1: Origin on machine coordinate system is not defined.
Function
Remark
Axis Control Bit:
Origin Search
The bit [No Origin] will be turned OFF when Origin Search is completed normally.
If the origin search method is “Origin at power ON”, the bit [No Origin] will be turned
OFF simultaneously when the bit [Command Disabled/Enabled] is turned ON.
Axis Control Bit:
Forced Origin
The bit [No Origin] will be turned OFF when Forced Origin is completed normally.
Содержание CS1W-MCH71 -
