Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 394 / 717

349
Command Details
Section 6-3
• END command cancels axis operation commands (MOVELINK/CAM-
BOX/CONNECT/ADDAX/SYNC/ SPEED/TORQUE) being executed.
• In execution of axis operation commands other than the above, END com-
mand execution will be completed after the axis status bits [Positioning
completed] (x+32, bit06 for Axis 1) for all the axes operated with the pro-
gram are turned ON (1).
• Modal data is initialized according to the default setting (motion task).
• All the axes reserved by axis declaration are released.
• End command execution will be completed when all the processing above
is completed.
Sub-Program Call
(GOSUB)
The specified sub-program is called.
Command type Single execution command
Format GOSUB_P<sub-program number>
Ex: GOSUB_P500;
Operand
Note (1) Word data is extended to long word data with a sign in the MC Unit.
(2) Figures below the decimal point are to be omitted.
Description • Sub-programs are executed.
• Sub-programs can be nested up to 5 levels.
• If the nesting limit is exceeded, the alarm [2002h: Sub-program nesting
error] will occur.
• GOSUB command execution will be completed when the operation
moves to the sub-program successfully.
Operand Setting range Decimal Variable specification INC/ ABL
influ-
ence
Bit Word Long
word
Real
number
Indirect
specifi-
cation
Sub-program num-
ber 500 to 999
1500 to 1999 No No Yes (See
note 1.) Yes Yes (See
note 2.) Yes No
GOSUB P500
GOSUB P501
RETURN
RETURN
Main program
Sub-program 500
Sub-program 501