Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 523 / 717

478
Interface Specifics
Section 7-4
Effect on Other Functions Nil
System Parameter The settings of the following parameters determines the speed pattern:
Program Example
Status Bits Busy JOG cannot be executed when
ON.
In Servo Lock JOG cannot be executed when
OFF.
No Origin No effect
Axis Operating JOG cannot be executed when
ON.
Positioning Completed No effect
Positioning Completed (No.2) No effect
Axis Machine Lock Status No effect
Command Disabled/Enabled JOG cannot be executed when
OFF.
Axis Not Used/Used JOG cannot be executed when
ON.
In Manual/Automatic Mode JOG cannot be executed when
ON.
Classification Item Effect
Parameter No. Name
P2AA02 Maximum manual feed rate
P2AA04 Manual feed rate
P2AA07 Manual feed acceleration time
P2AA08 Manual feed deceleration time
P2AA10 Manual feed acceleration/deceleration type
P2AA12 Manual feed S-curve time constant
x+32 to 63.03 x+32 to 63.15
JOG Operation
Direction Switch
JOG Operation
Condition In Servo Lock In Manual Mode
x+0 to 31.12
JOG/STEP Operation Direction
x+0 to 31.04
JOG Operation