Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 439 / 717

394
Operating Mode
Section 7-2
Word Allocation Example The word allocation for the ladder program above is shown below (Unit num-
ber: 0):
Note When setting the custom bit area from WR200, the area range for the Unit is
set as shown below:
m+0
Area type specification on the CPU 0002h (WR)
m+1 Bit area first address 00C8h (200)
Description in ladder program Axis 1 Axis 2
R1 to R3 (Work bit) W50001 to W50003
x+0.15, x+1.15 (Manual/Automatic
Mode) W20015 (See note.) W20115 (See note.)
n+4.02 (Start Mode 1) 150402
n+4.04 (Deceleration Stop) 150404
n+4.01 (Motion Program Start) 150401
m+22 (Program Number Setting) DM30022
x+32.15, x+33.15 (Automatic Mode) W23215 (See note.) W23315 See note.)
x+32.03, x+33.03 (In Servo Lock) W23203 (See note.) W23303 (See note.)
x+32.13, x+33.13 (Command Enabled) W23205 (See note.) W23305 (See note.)
n+17.01 (Motion Program Operating) 151701
n+12.00 (Alarm Occurring) 151200
Automatic/Manual Mode Switch 000100
Start Button 000101
Program Number Setting Button 000102
Pause Button 000103
Start Mode Switch 000104