Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 138 / 717

93
System Parameters
Section 4-2
Note For details of origin search operations, see SECTION 8 Establishing the Ori-
gin (Page 532).
Explanation
Sets the origin search start direction for the origin search method 1 (Limit
reversal).
0: Same as the phase-Z detection direction
1: Opposite to the phase-Z detection direction
Note The setting of this parameter is ignored in other origin search methods.
Explanation
Sets the phase-Z (phase-C) detection direction for origin search methods 1, 2,
and 3 (other than 0:Origin at power ON).
0: + direction
1:
−
direction
Note The setting of this parameter is ignored in the origin search method 0: Origin
at power ON.
2 2-level speed in 1 direction
Origin search is executed only in 1 direction.
After starting an origin search in the phase-Z detection direction at
the origin search approach speed, the speed changes to the origin
search creep speed at the rise of the origin determine signal input to
travel for the final interval and an origin is determined. Inputting the
limit input signal before inputting the origin determine input signal
activates the alarm.
3 3-level speed in 1 direction
Origin search is executed only in 1 direction.After starting an origin
search in the phase-Z detection direction at the origin search feed
rate, the speed is changed to the origin search approach speed at the
rise of the origin proximity input signal (Normally Open contact). At
the rise of the origin determine signal input after the fall of the origin
proximity signal input, the speed changes to the origin search creep
speed to travel for the final interval and finally an origin is established.
Inputting the limit input signal before inputting the origin proximity
input signal activates the alarm.
Setting Explanation
No. Address in MC
Unit
Name Type Unit Immediate
updating
P4AA02 5AC1h +
(AA * 14h) Origin search start direction Data --- No
Data configuration Setting range
00000000 to 00000001 Hex
(0 to 1) Initial value
00000000 (0)
31 00
Origin search start direction
No. Address in MC
Unit
Name Type Unit Immediate
updating
P4AA03 5AC2h +
(AA * 14h) Phase-Z (Phase-C) detection
direction Data --- No
Data configuration Setting range
00000000 to 00000001 Hex
(0 to 1) Initial value
00000000 (0)
31 00
Phase-Z (Phase-C) detection direction