Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 10 / 717

xi
Guide to Version Upgrades
Guide to CJ1W-MCH71 Version Upgrade
Function Upgrades from
Unit Version 3.0 to 3.1 Restarting after Restoration
Expanded Bank Switching for Interpolation Acceleration/Deceleration
Times
Internal Overrides
Connecting to SMART STEP Junior Servo Drivers
Previous versions
(Unit Ver. 3.0 and earlier)
Current version
(Unit Ver. 3.1)
After data has been restored from the
CPU Unit's flash memory, the Unit must
be restarted by cycling the CPU Unit's
power supply. After data has been restored from the
CPU Unit's flash memory, the Unit is
restarted using a bit between A50100 and
A50115 in the Auxiliary Area of the CPU
Unit. For details, refer to
7-1 Overview .
Previous versions
(Unit Ver. 3.0 and earlier)
Current version
(Unit Ver. 3.1)
The acceleration time and deceler-
ation time used for interpolation
operations cannot be set sepa-
rately. The acceleration time and deceleration time
used for interpolation operations can be set sep-
arately.
P00004, bit 13: Bank switching method selection
0: Select the same bank for acceleration and
deceleration (same as for version 3.0).
1: Select different banks for the acceleration
time and deceleration time.
Parameters P00M11 to P00M15 are used to set
acceleration times, and P00M16 to P00M20 are
used to set deceleration times. For details, refer
to
6-1 Basic Information .
Previous versions
(Unit Ver. 3.0 and earlier)
Current version
(Unit Ver. 3.1)
There is a function for changing
the axis feed rate from a ladder
program, but not from a motion
program. The feed rate when the following commands are
executed can be changed from a motion pro-
gram.
Commands for which an override can be speci-
fied from the motion program:
MOVE Rapid feed rate
DATUM Origin return feed rate
MOVEI Rapid feed rate, external position-
ing rate
MOVET Rapid feed rate
The actual speed is as follows:
Actual speed = Axis feed rate x (Axis ov
Internal override)
For details, refer to
6-1 Basic Information .
Previous versions
(Unit Ver. 3.0 and earlier)
Current version
(Unit Ver. 3.1)
Cannot be connected. Can be connected.