Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 406 / 717

361
Command Details
Section 6-3
6-3-6 Simple Arithmetic Operation
ASSIGN ( = )
Values are assigned for the specified variable.
Command type Multiple execution command
Format <First term> = <Second term>;
Ex: #MF1000 = 123.45;
Operand
Note Both immediate values and variables can use the values within the ranges
defined for each type.
• Integer immediate value:
−
2147483648 to 2147483647
• Decimal immediate value:
−
2147483648. to 2147483647.
• Bit type: 0, 1
• Word type:
−
32768 to 32767
• Long word type:
−
2147483648 to 2147483647
• Real number type:
±
(1.175E-38 to 3.402E+38), 0
• Indirect specification type: 0 to 10239
Description • The value in the second term is assigned to the first term.
• If the types are different on both sides, the type on the right is converted
to that of the left.
• If the value on the right side cannot be stored in the left side, the alarm
[2005h: Operation overflow] will occur.
Precaution for Handling the Data Types
1,2,3... 1. Bit type
• When the bit type is used, all the operands must be the bit type.
• The integer immediate values 0 and 1 are treated as the bit type.
2. Types other than the bit type
• Types other than the bit type are prioritized in the following order
Real number type > Long word type > Word type
• Operation is performed in the type of the highest priority, and the op-
eration result will be stored after being converted to the type on the left.
• The integer immediate value is treated as long word type, and the dec-
imal immediate value is treated as real number type.
Operand Setting range Decimal Variable specification INC/ ABL
influ-
ence
Bit Word Long
word
Real
number
Indirect
specifi-
cation
First term Variable No Yes Yes Yes Yes No No
Second term Operation
numerical value
range (See
note.) Yes Yes Yes Yes Yes Yes No