![background image](http://html1.mh-extra.com/html/omron/cs1w-mch71/cs1w-mch71_operation-manual_742367530.webp)
485
Interface Specifics
Section 7-4
Command and Operation
Origin search operation will be started when the bit [Origin Search] is turned
ON. Even if the machine origin is not detected, the axis decelerates to stop
when the bit is turned OFF.
Status Condition
Effect of Other Functions
Name
Specifications
Origin Search
0: Nil
1: Continues Origin search
↑
: Starts Origin search
↓
: Stops Origin search
Name
Specifications
Machine Origin
0: Machine coordinate system FB position is outside of origin
in-position range.
1: Machine coordinate system FB position is within origin in-
position range.
Busy
0: Not executing any of the functions listed below.
1: Executing one of the functions listed below, or the com-
mand bit is ON.
JOG, STEP, Origin Search, Machine Origin Return, Error
Counter Reset, Forced Origin, and ABS Origin Setting
No Origin
0: Origin on machine coordinate system is defined.
1: Origin on machine coordinate system is not defined.
Axis Operating
0: No axis operating command
1: Axis operating command being output.
Positioning Com-
pleted
0: Outputting positioning command, or axis is outside of in-
position range.
1: Not outputting positioning command, and axis is within in-
position range.
Axis Not Used/Used
0: Axis is not being used.
1: Axis is being used.
(In Manual Mode: Axis is used for JOG etc., In Automatic
Mode: Axis is declared in the operating program)
Classification
Item
Effect
Physical Status
Servo Axis
No effect
Virtual Axis
Performs the same operation as
[Machine Origin Return]
I/O Axis
Ignored
Counter Axis
Ignored
Содержание CS1W-MCH71 -
