Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 656 / 717

611
Slave Modules
Section 10-2
Output variables
Address Bit Symbol Name Description
OW0050 0 M-SET1 Counter 1
Mode set The counter mode setting signal
ON: Mode setting signal is effective
1 N-SET1 Counter 1
Notch point setting The notch point setting preset signal
Notch point is set at the rise of the signal (OFF-ON).
2 P-SET1 Counter 1
Current value setting The counter’s current value preset signal
Current value is set at the rise of the signal (OFF-ON).
3 C-ENB1 Counter 1
Count enable Input pulses can be counted when this is ON.
ON: Count enabled
4 N-ENB1 Counter 1
Notch output enable Notch output can be output when this is ON.
ON: Notch output enabled
5 P-RES1 Counter 1
Current value reset Counter’s current value is reset to “0”.
Current value is reset at the rise of the signal (OFF-ON).
6 N-RES1 Counter 1
Notch output reset Latch status for notch output is reset.
Latch status is reset at the rise of the signal (OFF-ON).
7 L-RES1 Counter 1
Count value reset Input status of external latch is reset.
Input status is reset at the rise of the signal (OFF-ON).
8 M-SET2 Counter 2
Mode set The counter mode setting signal
ON: Mode setting signal is effective
9 N-SET2 Counter 2
Notch point setting The notch point setting preset signal
Notch point is set at the rise of the signal (OFF-ON).
10 P-SET2 Counter 2
Current value setting The counter’s current value preset signal
Current value is set at the rise of the signal (OFF-ON).
11 C-ENB2 Counter 2
Count enable Input pulses can be counted when this is ON.
ON: Count enabled
12 N-ENB2 Counter 2
Notch output enable Notch output can be output when this is ON.
ON: Notch output enabled
13 P-RES2 Counter 2
Current value reset Counter’s current value is reset to “0”.
Current value is reset at the rise of the signal (OFF-ON).
14 N-RES2 Counter 2
Notch output reset Latch status for notch output is reset.
Latch status is reset at the rise of the signal (OFF-ON).
15 L-RES2 Counter 2
Count value reset Input status of external latch is reset.
Input status is reset at the rise of the signal (OFF-ON).
OW0051 0 N-ON1 Counter 1
Forced notch output Notch output is forced ON.
ON: Forced output
1 N-ON2 Counter 2
Forced notch output Notch output is forced ON.
ON: Forced output
2 to 7 Not used
8 MON1 Monitor 1 Combining the ON/OFF status of Monitor 1 to 3 enables
monitoring of the followings.
• Counter current value
• External latch data
• Status
• Mode settings
• Counter 1, Notch point setting value
• Counter 2, Notch point setting value
• Current set value
9 MON2 Monitor 2
10 MON3 Monitor 3
11 to 15 Not used