Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 617 / 717

572
Zones
Section 9-7
■
Enabling and Disabling Zone Bits
Each zone bit can be enabled or disabled by turning ON or OFF the applica-
ble bits for the following variables.
The following output variables can be used to check whether a zone bit is
enabled or disabled.
Address Name Contents
IW0304 Zone enable bits (No. 1 to 16) Enables or disables zone bits
No. 1 to 16.
No. 1 corresponds to bit 0,
and No. 16 corresponds to bit
15.
0: Disable (Do not use)
1: Enable (Use)
IW0305 Zone enable bits (No. 17 to
32) Enables or disables zone bits
No. 17 to 32.
No. 17 corresponds to bit 0,
and No. 32 corresponds to bit
15.
0: Disable (Do not use)
1: Enable (Use)
Address Name Contents
OW0304 Zone monitoring
status bits (No. 1 to
16) Used to output the enabled/disabled status of
zone bits No. 1 to 16.
No. 1 corresponds to bit 0, and No. 16 corre-
sponds to bit 15.
0: The setting for the zone upper and lower lim-
its is incorrect, or the zone enable bit is OFF
(disabled).
1: The setting for the zone upper and lower lim-
its is correct and the zone enable bit is ON
(enabled).
OW0305 Zone monitoring
status bits (No. 17 to
32) Used to output the enabled/disabled status of
zone bits No. 17 to 32.
No. 17 corresponds to bit 0, and No. 32 corre-
sponds to bit 15.
0: The setting for the zone upper and lower lim-
its is incorrect, or the zone enable bit is OFF
(disabled).
1: The setting for the zone upper and lower lim-
its is correct and the zone enable bit is ON
(enabled).