Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 587 / 717

542
ABS Encoder Origin Setting
Section 8-6
1,2,3... 1. Execute ABS encoder setup in the system check mode (Fn008).
Operation procedure
2. Turn OFF the power once, and then ON again.
The alarm (A.81) will not be cleared when the setup operation is complet-
ed.
The alarm will be cleared after the power is turned OFF once (check the
power-indicator goes OFF), and then ON again. If no error occurs after
power ON, the setup is completed.
If the alarm (A.81) occurs, start over the setup operation.
ABS encoder setup in the
system check mode
More than 1second
Displays PGCL1
Sets PGCL5
Setup operation
Done display flashing
(setup is completed)
Returns to the PGCL5 display
After 1second
More than 1second
PR02W OPR Key OPR Display Description
Status display mode
Note When the power is turned ON for the first time after con-
necting the motor with absolute encoder, A.81 (backup
error) will be displayed.
( ) Press the key to select the system check mode.
Press the key to select the function No. Fn008.
(More than 1 second)
Press the key to start the ABS encoder setup function.
"PGCL1" will be displayed.
Press the key to display “PGCL5”.
( ) Press the key.
The ABS encoder setup will be processed. After completing the
setup, "donE" will be displayed and flash for about 1 second.
After 1 second After displaying "donE", "PGCL5" will be displayed again.
(More than 1 second)
Function No. in the system check mode will be displayed again.
More than
1 second
More than
1second