![background image](http://html1.mh-extra.com/html/omron/cs1w-mch71/cs1w-mch71_operation-manual_742367556.webp)
511
Interface Specifics
Section 7-4
Status Condition
The operating mode status is output to the bit [In Manual/Automatic Mode].
Effect of Other Functions
Conditions for each Axis Status Bit are as shown below:
Effect on Other Functions
The functions on each axis are limited depending on ON/OFF of the bit [In
Manual/Automatic Mode] as shown below:
Name
Specifications
Busy
0: Not executing any of the functions listed below.
1: Executing one of the functions listed below, or the com-
mand bit is ON.
JOG, STEP, Origin Search, Machine Origin Return, Error
Counter Reset, Forced Origin, and ABS Origin Setting
Axis Not Used/Used
0: Axis is not being used.
1: Axis is being used.
(In Manual Mode: Axis is used for JOG etc., In Automatic
Mode: Axis is declared in the operating program)
In Manual/Automatic
Mode
0: In Manual Mode (JOG, STEP, and Origin Search can be
executed.)
1: In Automatic Mode (Motion programs can be executed.)
Name
Condition
Busy
• Does not turn ON
• The bit [Manual/Automatic Mode] can be changed (ON/
OFF) in Busy state.
Servo Lock
• No effect
No Origin
• The bit [Manual/Automatic Mode] can be changed
regardless of whether the origin for the machine coordi-
nate system has been defined or not.
Axis Operating
• Does not turn ON
Positioning Completed
• The bit [Manual/Automatic Mode] cannot be changed
when OFF.
Axis Machine Lock Status • No effect
Command Disabled/
Enabled
• The bit [Manual/Automatic Mode] cannot be changed
when OFF.
Axis Not Used/Used
• Does not turn ON
In Manual/Automatic
Mode
• No effect
Function
In Manual/Automatic Mode
OFF (Manual)
ON (Automatic)
Axis Control Bit: Axis Alarm Reset
Can be executed
Can be executed
Axis Control Bit: Deceleration Stop
Can be executed
Cannot be executed
Axis Control Bit: Servo Lock
Can be executed
Can be executed
Axis Control Bit: Servo Unlock
Can be executed
Can be executed
Axis Control Bit: JOG
Can be executed
Cannot be executed
Axis Control Bit: STEP
Can be executed
Cannot be executed
Axis Control Bit: Origin Search
Can be executed
Cannot be executed
Axis Control Bit: Machine Origin Return Can be executed
Cannot be executed
Axis Control Bit: Error Counter Reset
Can be executed
Can be executed
Axis Control Bit: Forced Origin
Can be executed
Cannot be executed
Axis Control Bit: ABS Origin Setting
Can be executed
Cannot be executed
Axis Control Bit: Axis Override Enable
Can be executed
Can be executed
Axis Control Bit: JOG/STEP Direction
Can be executed
Cannot be executed
Axis Control Bit: Axis Machine Lock
Can be executed
Can be executed
Содержание CS1W-MCH71 -
