![background image](http://html1.mh-extra.com/html/omron/cs1w-mch71/cs1w-mch71_operation-manual_742367425.webp)
380
Overview
Section 7-1
For general I/O area A in the MC Unit, allocations are specified by setting the
[PORT_A transfer area type at MC Unit] (m+74) and the [PORT_A transfer
first address at MC Unit] (m+75) of [General I/O area range setting] in the allo-
cated DM area.
Note
m: DM Area for CPU Bus Unit words D30000 to D31599 (100 words per Unit
according to Unit No.)
Relationship between MC Unit Transfer Area Type, Transfer First
Address, and Number of Transfer Words
The following combinations cannot be transferred. If these combinations are
specified, the data will not be transferred, but an error will not occur.
1,2,3...
1.
Writing data from the CPU Unit to the MC Unit system variables
2.
Writing data from the CPU Unit to the MC Unit output variables (OW0300
to OW04FF)
3.
Transferring data to an unsupported area (write/read: Examples 2 and 3 in
following diagram)
Meaning
Word
Bits
Name
Function
General I/O A area
range setting (first
time only) at MC Unit
m+74
00 to
15
PORT_A transfer
area type at MC Unit
General I/O A area transfer area type at MC Unit (hexa-
decimal)
0000: System variables
0001: Global general variables
0002: Input variables
0003: Output variables
0004: Position data
0005: Reserved
0006: Task variable 1
0007: Task variable 2
0008: Task variable 3
0009: Task variable 4
000A: Task variable 5
000B: Task variable 6
000C: Task variable 7
000D: Task variable 8
Other: Reserved
m+75
00 to
15
PORT_A transfer
first address at MC
Unit
General I/O area A first address of transfer source at MC
Unit (hexadecimal)
System variables
0000-07FF
Global general variables
0000-1FFF
Input variables
0000-0FFF
Output variables
0000-0FFF
Position data
0000-27FF
Task variables
0000-007F
General I/O B to H
area range setting
(first time only) at
MC Unit
m+76
to
m+89
---
Same as General I/O
A area range setting
Same as General I/O A area range setting
Содержание CS1W-MCH71 -
