Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 132 / 717

87
System Parameters
Section 4-2
Note (1) Enabling S-curve filter causes the delay for the S-curve time constant.
(2) This parameter cannot be changed during operation.
Explanation
Sets the time required to decelerate from max. rapid feed rate to zero.
Note (1) Enabling S-curve filter causes the delay for the S-curve time constant.
(2) This parameter cannot be changed during operation.
Explanation
Sets the time required to accelerate from zero to max. manual feed rate.
Note (1) Enabling S-curve filter causes the delay for the S-curve time constant.
(2) This parameter cannot be changed during operation.
(3) For details of Accel/decel patterns, see 6-1-5 Axis Movement Operation
(Page 248).
Explanation
Sets the time required to decelerate from max. manual feed rate to zero.
Note (1) Enabling S-curve filter causes the delay for the S-curve time constant.
(2) This parameter cannot be changed during operation.
(3) For details of Accel/decel patterns, see 6-1-5 Axis Movement Operation
(Page 248).
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA06 55C5h +
(AA * 14h) Rapid feed deceleration time Data ms Yes
Data configuration Setting range
00000000 to 0000EA60 Hex
(0 to 60000) Initial value
00000064 (100)
31 00
Deceleration time
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA07 55C6h +
(AA * 14h) Manual feed acceleration time Data ms Yes
Data configuration Setting range
00000000 to 0000EA60 Hex
(0 to 60000) Initial value
00000064 (100)
31 00
Acceleration time
No. Address in MC
Unit
Name Type Unit Immediate
updating
P2AA08 55C7h +
(AA * 14h) Manual feed deceleration time Data ms Yes
Data configuration Setting range
00000000 to 0000EA60 Hex
(0 to 60000) Initial value
00000064 (100)
31 00
Deceleration time